Posts tagged: Projects

Replacing a cracked LCD screen from my Panasonic DMC-​​TZ15 Camera

The result of me dropping my camera on a metal bar.

Prob­lem Descrip­tion One day i was hold­ing my DMC-​​TZ15 cam­era when sud­denly it slipped through my hands and dropped onto a metal rail. The result was a cracked LCD screen. I was very lucky that the cam­era was off as this reduced the chances of break­ing the lens pack­age. The pic­ture to the right shows a …

Replacing a Faulty LP171WX2 17inch Screen from a DELL Inspiron 9300

Horizontal lines of defected pixels caused by manufacturer's production process

Prob­lem Descrip­tion I had bought a DELL Insp­iron in the year 2005. In 2007, the LCD screen had ver­ti­cal lines of vary­ing colours. Dell had then offered to replace the screen for free and they had accepted this to be a known issue to their cus­tomers. Then, in late 2008, the same prob­lem occurred! I had …

Now Working for Parsons Brinckerhoff for IAP

pb_image2

Par­sons Brinck­er­hoff Aus­tralia Pty Ltd. IAP stands for Indus­trial Affil­i­ates Pro­gram and is Grif­fith University’s work expe­ri­ence pro­gram for final year stu­dents. The course struc­ture for IAP how­ever is rather aca­d­e­mic than indus­trial, with a Plan­ning Report due before Ori­en­ta­tion Week and a Lit­er­a­ture Review due before week 4, IAP shall prove to be a challenge …

Replacing a Broken Door Handle on My Car

broken_door_car

Project Date: Feb 2009 Project Descrip­tion: This project was con­ducted by me and applied to my Dae­woo Nubira SE 5 Door Hatch. Pho­tos were taken by me from my Pana­sonic Z15 camera.

2655GFS Digital Video Production Assignment 1

sony-dsr-pd170.134878

Pref­ace Terms You are view­ing an assign­ment from my 2655GFS Dig­i­tal Video Pro­duc­tion course at Grif­fith Film School. This assign­ment is group work, in which intel­lec­tual prop­erty remains that of the spec­i­fied pro­duc­tion mem­bers. Feel free to use or quote any mate­r­ial from this assign­ment, how­ever, you must credit this work as “E. den Dekker, M. Wilson, …

DIY GRP Molded Subwoofer Enclosure for My Car

sub_molded

Project Date: 2006 Sum­mer hol­i­days. Prob­lem Descrip­tion: I wanted two 12 inch sub­woofer enclo­sures in my small boot. I also needed enough free space for hol­i­day pur­poses. I then researched viable sub­woofer dri­vers and found some pio­neers. I noted the rec­om­mended vol­ume for each dri­ver and made sure that i can still have enough room …

WordPress Themes